+ 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 18 lb. (8.5 kg)weight savings over OEM center muffler. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - replaces OEM center muffler and connects to OEM header and OEM side mufflers and OEM tips. Please note: this muffler is a direct replacement the 991 Carrera s (3.8l - us model) which comes standard with valves. It is also a direct replacement for the Porsche sport exhaust option. This center muffler bypass for the 991 is one of the most technically advanced for Porsche t...(choose a part on the right to read more)

For 997-2 with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - made in Germany power: - 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm) - 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm) - with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm) tech tip: dme programming neccessary!

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Protect the interior of your Boxster against dust, dirt and rain. Features classic tenax fasteners on the dashboard and doors as well as multiple attachment points behind the hood storage box. Looks cool, too!

Protect your engine and lower the operating water temperature by up to 60* f. Our kit contains everything you need to install this kit on a Cayman. Don't be fooled by cheaper kits that claim they are complete, if the radiator is not supported correctly, road and track vibrations can destroy your investment. Not for tiptronic transmissions!

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The open architecture of this muffler allows for a deeper four-cylinder turbo tone, with plenty of whistling on tap. Coming off throttle from higher rpms exudes a chorus of snarling, gurgling and crackling letting everyone know that this car is not your average 982. + 15 hp & + 12 tq gain. - 2 x 3.5 (90 mm) round tips. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - lower deeper tones than the factory exhaust with far more whistling and gurgling / crackling off throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - no drone in the cabin. - "aero quip" style motorsport muffler connections t...(choose a part on the right to read more)

Bilstein b4 OEM (original equipment manufacturer) replacement shock absorber set (4 pieces) for your Porsche with standard suspension, pasm and tiptronic. The b4 dampers from bilstein are the perfect replacement for your Porsche. Facts: - constant damping power under any load - high power reserves for maximum safety - ride like it's the first time, every time - OEM quality - bilstein gas pressure technology

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharg...(choose a part on the right to read more)

This kit convert's the 997 turbo pccb rotors to steel rotors with yellow pagid pads.( only 5-hole, not central lock ) this system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 2 x set ( front and rear ) brake pad set (pagid yellow - rs29 ) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).

This item may need to be sourced from Germany and would ...(choose a part on the right to read more)

997 GT3 rear spoiler fits 997turbo includes: deck lid, aluminum upright, 3rd brake light housing and kevlar/carbone wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass, kevlar-carbone. Also available with wing blade in fiber (gfk) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x

This item may need to be sourced from Germany and would take 2-4 ...(choose a part on the right to read more)

Are you experiencing vibrations in the cabin? The most likely cause is a worn transmission mount. Severely worn mounts translate to engine component wear and can even cause difficulty shifting. We can offer your c4 a more sporty feel without the harsh vibration from a solid mount. Our transmission mount is manufactured in europe by an OEM supplier using the finest materials (high carbon steel, 7075 t6 aluminum and 85 shore rubber - rs spec). The rs spec shore rubber offers the c4 sportier handling without being too stiff for street use. Be sure to swap yours out during the next service. Sold individually. Central fitment into the transmission carrier bracket 96437502301. 1 qty. Required. Tech tip: now is the ti...(choose a part on the right to read more)

Porsche automobiles have always been know as state-of-the-art, and often are seen as difficult to work on and diagnose is a way to diagnose your Porsche just like the factory-trained technician does at the dealership! The dure by non-technicians and owners alike. Now therametric diagnostic tool is a software suite that installs on your pc laptop and hook to your car's data port and can read and communicate with the Porsche dme. It allows you to reset service reminders, read and reset diagnostic trouble codes, display and log actual values in real time, and turn off the check engine and airbag lights (and tell you why they are on in the first place). The durametric diagnostic tool can communicate with the engin...(choose a part on the right to read more)

General Fitment

Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 309kw (420hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 256km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,0s tuning: max. Power - 325kw (442hp) @ 6000rpm max. Torque - 530nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)

997 GT3 rear spoiler fits all 997 tt includes: deck lid, aluminum upright, 3rd brake light housing and wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass. Also available with wing blade in kevlar / carbon FVD512997gt3rs2 tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once or...(choose a part on the right to read more)

Kit includes:
Ecu software (flashclient cable) and sport air filter

Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 206kw (280hp) @ 6200rpm
Max. Torque - 320nm (236lbf ft) @ 4700-6000rpm
Max. Speed - 268km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.5s

Tuning:
Max. Power - 215kw (293hp) @ 6500rpm
Max. Torque - 335nm (247lbf ft) @ 5000-6000rpm
Max. Speed - 271km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)

General Fitment

Kit includes:
Software (fast load), sport air filter,complete " Brombacher" powerkit for 987

Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,1:1
Max. Power - 217kw (295hp) @ 6250rpm
Max. Torque - 340nm (251lbf ft) @ 4400-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.4s

Tuning:
Max. Power - 235kw (320hp) @ 6500rpm
Max. Torque - 365nm (269lbf ft) @ 5000-5500rpm
Max. Speed - 280km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.0s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management s...(choose a part on the right to read more)

General Fitment

Kit includes:
Ecu software (flashclient cable), sport air filter, headers, catalytics, TUV exhaust system with 200 cell catalytics

Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 206kw (280hp) @ 6200rpm
Max. Torque - 320nm (236lbf ft) @ 4700-6000rpm
Max. Speed - 268km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.5s

Tuning:
Max. Power - 224kw (305hp) @ 6500rpm
Max. Torque - 345nm (254lbf ft) @ 5000-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine natur...(choose a part on the right to read more)

General Fitment

Kit includes: sport motronic dme exch., sport air filter, sportmuffler TUV, k24-race turbocharger l/r genuine: engine - 6cyl. Boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 309kw (415hp) @ 6000rpm max. Torque - 560nm (413lbf ft) @ 3500-4500rpm max. Speed - 305km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.2s tuning: max. Power - 397kw (540hp) @ 7000rpm max. Torque - 760nm (561lbf ft) @ 4500rpm max. Speed - 331km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the...(choose a part on the right to read more)

Kit includes:
Ecu software (flashclient cable), sport air filter, headers, catalytics, TUV exhaust system with 200 cell catalytics

Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 176kw (240hp) @ 6400rpm
Max. Torque - 270nm (199lbf ft) @ 4700-6000rpm
Max. Speed - 256km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.2s

Tuning:
Max. Power - 195kw (265hp) @ 6500rpm
Max. Torque - 295nm (218lbf ft) @ 5000-5500rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.7s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine natur...(choose a part on the right to read more)

General Fitment

Kit includes:
FVD flash cable and sport air filter

Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,1:1
Max. Power - 217kw (295hp) @ 6250rpm
Max. Torque - 340nm (251lbf ft) @ 4400-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.4s

Tuning:
Max. Power - 227kw (308hp) @ 6500rpm
Max. Torque - 355nm (262lbf ft) @ 5000-5500rpm
Max. Speed - 278km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.2s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the...(choose a part on the right to read more)

General Fitment

Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Tig welded. Semi-gloss black finish. Cost effective for club sport use. We recommend adding the harness bar, part # hei600036s to your order as it...(choose a part on the right to read more)

Handy reference for storing your 914. This procedure, as well as many others, are listed in the 914 Tech Tips 700, part number rbk7074.

General Fitment

Shatterproof polycarbonate lenses in grey. Metal frame. Arms with acetate tips. Black. Porsche logo lasered onto the left arm. 100% uv protection. Unisex design.

General Fitment

Known as: galvano silver f 987u7 10735>> f 987u7 30403>> f >>987u7 10734 f >>987u7 30402 997.613.433.03 v04 997.613.445.03 see technical manual group 91 6119 91 7719 / galvano silver f 987u7 62370>> f 987u7 81305>> f >>987u7 62369 f >>987u7 81304 997.613.433.03 v04 997.613.445.03 see technical manual group 91 6119 91 7719 / galvano silver f 997s7 10598>> f 997s7 65574>> f 997s7 30963>> f 997s7 75002>> f 997s7 10599>> f 997s7 65577>> f 997s7 30964>> f 997s7 75930>> f 997s7 45186>> f 997s7 55203>> f >>997s7 10597 f >>997s7 65573 f >>997s7 30962 f >>997s7 75002 f >>997s7 10598 f >>997s7 65576 f >>997s7 30963 f >>997s7 75929 f >>997s7 45185 f >>997s7 55202 997.613.445.03 997.613.433.03 v04 multi-function see tec...(choose a part on the right to read more)

View/Change Diagram

Boxster 2005-08 - Front Axle/Steering	Boxster 2009-11 - Front Axle/Steering
Cayman 2006-08 - Front Axle/Steering	Cayman 2009-12 - Front Axle/Steering
911 2005-08 - Front Axle/Steering	911 2009-12 - Front Axle/Steering
911 Turbo/GT2 2007-09 - Front Axle/Steering

Known as: galvano silver f 987u7 10735>> f 987u7 30403>> f >>987u7 10734 f >>987u7 30402 997.613.434.03 v04 997.613.445.03 see technical manual group 91 6119 91 7719 / galvano silver f 987u7 62370>> f 987u7 81305>> f >>987u7 62369 f >>987u7 81304 997.613.434.03 v04 997.613.445.03 see technical manual group 91 6119 91 7719 / galvano silver f 997s7 10598>> f 997s7 65574>> f 997s7 30963>> f 997s7 75003>> f 997s7 10599>> f 997s7 65577>> f 997s7 30964>> f 997s7 75930>> f 997s7 45186>> f 997s7 55203>> f >>997s7 10597 f >>997s7 65573 f >>997s7 30962 f >>997s7 75002 f >>997s7 10598 f >>997s7 65576 f >>997s7 30963 f >>997s7 75929 f >>997s7 45185 f >>997s7 55202 997.613.445.03 997.613.434.03 v04 see technical manual g...(choose a part on the right to read more)

View/Change Diagram

Boxster 2005-08 - Front Axle/Steering	Boxster 2009-11 - Front Axle/Steering
Cayman 2006-08 - Front Axle/Steering	Cayman 2009-12 - Front Axle/Steering
911 2005-08 - Front Axle/Steering	911 2009-12 - Front Axle/Steering
911 Turbo/GT2 2007-09 - Front Axle/Steering

Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.

Milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensur...(choose a part on the right to read more)

General Fitment